Name: 
 

Premises Design



Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 1. 

Structured cabling standards call for a maximum length of UTP cable for data of __________.
A.
90 meters
B.
100 meters
C.
300 meters
D.
800 meters
 

 2. 

Structured cabling standards allow  for a maximum length of permanently installed (not including patchcords) UTP cable for data of __________.
A.
90 meters
B.
100 meters
C.
300 meters
D.
800 meters
 

 3. 

UTP cable installed above the ceiling can   __________  the celing tiles.
A.
not be laid on
B.
be hung from frames of
C.
be laid directly on top of
D.
must be sleeved to be laid on top of
 

 4. 

UTP cable installed above the ceiling in hot climates may not  __________.
A.
Meet crosstalk specs
B.
Pass certification tests
C.
Be fire safe
D.
Support full standard link distances
 

 5. 

Structured cabling standards call for a maximum length of UTP cable for voice (POTS) of __________.
A.
90 meters
B.
100 meters
C.
300 meters
D.
800 meters
 

 6. 

Structured cabling standards call for a maximum length of singlemode  fiber optic cable for backbones of __________.
A.
800 meters
B.
1000 meters
C.
3000 meters
D.
2000 meters
 

 7. 

Structured cabling standards call for a maximum length of multimode  fiber optic cable for backbones of __________.
A.
800 meters
B.
1000 meters
C.
3000 meters
D.
2000 meters
 

 8. 

For planning office layout, each user should be allocated _______ floor space.
A.
Adequate
B.
100 sq ft
C.
3 sq m
D.
shared
 

 9. 

Each floor should be allocated one _______ when when floor space is under 10,000 sq ft.
A.
Equipment room
B.
MUTOA
C.
User
D.
Telcom room (closet)
 

 10. 

Both equpment rooms and telecom rooms should have __________.
A.
Uninterruptible power
B.
Air conditioning
C.
Data quality ground
D.
All of the above
 

 11. 

One cannot emphasize strongly enough the value of _________.
A.
Standards
B.
Cabling
C.
Fiber optics
D.
Documentation
 



 
Check Your Work     Start Over